Error Codes


General
0 Function not successful
2 Successfully aborting
3 Function successful. Delete file before quitting
4 Function successful. Retry doing the failed op
8 Function called recursively. A least one call was successful, but some failed
-13 Invalid parameter passed
-789 The structure size is invalid
-27 Invalid bits/pixel
-11 Invalid width/height
-2 Invalid bitmap handle
-814 A NULL pointer was passed
-1360 Signed image data not supported
-290 The buffer size is too small
-149 An unspecified exception occurred - could be memory access violations
-351 There is nothing to do. No items was found
-144 Image is empty
-21 Invalid QFactor specified
-261 Invalid handle
-1364 32-bit Grayscale bitmaps not supported
-1486 The LUT length is invalid. LUTLength should be 1 << (HighBit - LowBit + 1)
-1491 The DIB is invalid
-100 User has aborted operation
-29 Escape key pressed - or user aborted operation
-1 Not enough memory available
-3 Not enough memory available (too low)
-16 Feature not supported
-143 Document capability is required
-804 Extended grayscale support is required
-315 JBIG capability is required
-10 File not found
-14 Not able to open file
-5 Error writing file
-6 File not present - abort
-7 Error reading file
-4 Error seeking to position
-295 Not enough disk space
-805 File is read-only. Cannot open file with write access
-9 Invalid file format
-8 Invalid filename specified
-1490 Error creating file
-309 The DXF filter is required
-319 The JBIG filter is required
-349 WMF filter is required
-355 CMW filter is required
-356 CMP filter is required
-357 FAX filter is required
-358 PDF filter is required
-359 TIF filter is required
-819 DCR filter is required
-820 KDC filter is required
-821 DCS filter is required
-822 ABC filter is required
-823 ABI (ABIC) filter is required
-824 JB2 (JBIG2) filter is required
-541 J2K filter is required
-825 PNG filter is required
-807 LTCLR.DLL is missing
-353 LVKRN.DLL is required
-818 LTSGM.DLL is missing
-1479 LTANN.DLL is missing
-1480 LTIMG.DLL is missing
-1482 LTKRN.DLL is missing
-1483 LTFIL.DLL is missing
-1484 LTDIS.DLL is missing
-1485 LTDIC.DLL is missing
-815 The overlay does not exist
-816 Something is wrong with the overlay index


File Handling
-28 Invalid window size
-1353 Invalid filter name
-310 Page not found
-311 You cannot delete a page from a file containing only one page
-12 Image format recognized, but sub-type not supported
-77 Premature end-of-line code
-800 The PSD Layer is missing
-23 Invalid compression format
-78 Bad version number
-520 Thumbnail not found
-1492 The PSD Channel is missing
-530 Error in JP2 Box values
-531 The header does not match the JP2 signature - not a JP2 file
-532 JP2 file has a feature that is usupported
-533 Invalid save options were specified to the encoder
-534 File header does not contain SOC marker
-535 File contains complete header but no compressed image data
-536 Invalid save options were specified or file includes invalid encoded values
-537 Compression ratio, target file size, or tile size was too small for encoder
-538 Specified Wavelet decomposition level was too high
-539 Decoder could not translate J2K marker - file is corrupt or invalid
-540 J2K file has image with more than 30 bits per component
-65 Stamp not found
-141 Stamp size is too big or invalid bits/pixel, etc.
-142 Stamp is present but data is corrupted
-801 Bad JPEG marker
-806 Bad JPEG Resync marker
-808 The size of the JPEG marker cannot exceed 64K
-809 The required JPEG marker is missing
-811 The marker index is invalid (too big)
-810 This file does not contain Exif extensions


Color Profiles
-918 Invalid colorspace
-785 Invalid format
-786 Method not supported
-787 Error opening profile
-788 Invalid color profile
-791 U and V not multiples
-792 No non-planar vertical sub sampling supported
-793 Planar alignment not supported
-794 Unsupported conversion
-795 Truncate height
-796 Truncate width
-797 Truncate width and height
-1150 Unknown ICC profile Tag
-1151 Unknown ICC profile Type
-1152 Unknown ICC profile Tag and Type
-1153 Invalid ICC profile
-1154 Invalid ICC profile
-812 The ICC profile was not found
-817 The ICC profile was invalid
-813 An error has occurred while decoding the profile


PDF
-721 The PDF file is encrypted but no password has been specified.
-722 Invalid password specified
-723 FAX is required for this function
-724 CMP is required for this function
-725 Invalid Document Structuring comments (Ps and EPS)
-726 Could not find Fonts directory
-727 Cannot insert, delete, append or replace pages
-728 File is corrupted
-729 Either the files required for initializing the PDF engine were not found or they were found but they incorrect


Dialogs
-150 An error occurred during creation of the common dialog
-151 You have already initialized the dialogs
-152 You did not initialize the dialogs
-153 You did not initialize the dialogs
-154 The dialogs could not load the LTCLR.dll
-155 The dialogs could not load the LTDLGRES.dll
-900 LTCLR.DLL is not loaded
-901 LDLGRES.DLL is not loaded
-902 Dialogs not correctly initialized


Annotation
-202 Annotation DLL not loaded
-200 LTDIS.dll not loaded
-201 LTFIL.dll not loaded
-148 One or more annotation objects are still locked


TIFF
-15 Unknown compression format
-917 The compact function was finished without copying all the pages
-140 Bad TIFF tag
-404 Tag not found
-1365 Cannot add tags to a IFD selected


Document
-1200 DLLs are not loaded
-1201 Specified index is not corrected
-1202 Invalid fill method
-1203 Invalid recognition module
-1204 Invalid character filter
-1205 Invalid zone type
-1206 Invalid language Id
-1207 Invalid spell language
-1208 Invalid enumeration section
-1209 Invalid page count
-1210 Illegal internal code as a parameter
-1211 Set parameter is not acceptable
-1212 End of list of the available Code Pages
-1213 Error while loading the Code Page Definition file
-1214 The length of the exported code exceeds the buffer size
-1215 Character conversion is not available for the given character
-1216 Conflict: The selected Code Page does not support some characters in the selected languages. There is no exact code in the Code Page for them
-1217 Character Set and Code Pages module initialization error
-1218 OCR engine initialization error
-1219 OCR engine termination error
-1220 Module initialization warning
-1221 Application has aborted the current process
-1222 Application has terminated the current recognition process without losing the recognized text
-1223 Module is not present
-1224 OS could not load a module
-1225 Missing entry in a module
-1226 Invalid module
-1227 Module initialization error
-1228 The requested function is not available, or there is no appropriate license
-1229 General error in the engine
-1230 General Protection Fault in the engine
-1231 Not supported operational system
-1232 Syntax error in the specified engine Settings file
-1233 Invalid setting
-1234 The engine is busy
-1235 Recognition process Time Out
-1236 Internal error in image module
-1237 Not enough memory during image processing
-1238 Invalid rectangle dimensions
-1239 Non-supported resolution
-1240 Cannot process compressed image
-1241 Invalid bitmap address
-1242 Unsupported BitsPerPixel value
-1243 Internal error in image module
-1244 Invalid image handle
-1245 Buffer overflow during processing the image
-1246 Image operation denied
-1247 No more lines in defined image area
-1248 Non-supported image size
-1249 Engine manager module error
-1250 No recognized text available, either because the zone is empty or the required recognition module has not been initialized properly
-1251 There is no selected recognition module
-1252 There is no zone in the zone list
-1253 Invalid zone index
-1254 Invalid zone coordinates
-1255 MOR recognition module initialization error
-1256 MOR recognition module's knowledge base file not found
-1257 MOR recognition module's knowledge base file corrupted
-1258 Incorrect knowledge base file version
-1259 Size of image is too large
-1260 File is corrupted
-1261 Internal error in the MOR recognition module
-1262 General Protection Fault in the MOR recognition module
-1263 Dot-matrix recognition error
-1264 Checkmark recognition error
-1265 HNR module's knowledge base file is corrupted
-1266 Parameter is out of valid range
-1267 Internal error in the RER module
-1268 RER module's knowledge base file not found
-1269 Character Set is empty for the RER module
-1270 The specified Character Set not fully supported by the RER recognition module
-1271 RER specific file not found
-1272 Not enough memory for the SPL module
-1273 Uninitialized spell object
-1274 Spell file open error
-1275 Spell file read error
-1276 User dictionary write error
-1277 Invalid file format
-1278 Module initialization error
-1279 User dictionary close error
-1280 Illegal language setting
-1281 No more suggestions/items available
-1282 Internal checking error
-1283 Item already exists in the User dictionary
-1284 Item doesn't exist in the User dictionary
-1285 Item wasn't inserted into the User dictionary
-1286 Section does not exist in the User dictionary
-1287 Regular expression syntax error
-1288 Output format conversion subsystem was not initialized
-1289 No more converters available
-1290 There is no converter DLL file
-1291 Wrong parameter or parameter not found
-1292 TMP file is corrupted
-1293 TMP file not found
-1294 Cannot create TMP file
-1295 Cannot seek in TMP file
-1296 TMP file read error
-1297 TMP file write error
-1298 Cannot close TMP file
-1299 Cannot load the DLL file
-1300 Internal error in ATMTXT module. (End-Of-File detected)
-1301 Not enough memory for ATMTXT/TMP module
-1302 Image is not available for inserting into the output
-1303 Not enough memory to register an info item
-1304 Output file open error
-1305 Output file read error
-1306 Output file not found
-1307 Output file write error
-1308 Invalid command sequence in the ICF file
-1309 Cannot create the output file
-1310 Not enough memory for ATMTXT/TXT module
-1311 Invalid document type
-1312 File too large
-1313 There was a WARNING during the output file conversion
-1314 Operation cancelled
-1315 Illegal option specified
-1316 Encrypted source
-1317 Output file seek error
-1318 Braille recognition module initialization error
-1319 Matrix matching recognition module initialization error
-1320 M/TEXT recognition module initialization error
-1321 Non-implemented feature
-1322 Couldn't find specific zone
-1323 No available selected zone
-1324 Can't export the specified page
-1325 Can't lock the specified page
-1326 Can't set the specified page to be activated.
-1332 Too many regions result when layout analysis
-1333 Top or bottom horizontal line not found
-1334 The slope of line too large
-1335 Frame has not been detected, so can not add virtual line
-1336 Too many lines
-1337 Too many pages in batch processing list
-1338 This region is not a table region
-1339 This region is a table region but contains no data
-1340 This line is not valid (neither horizontal nor vertical or type is not match)
-1341 Angle is too large, can not rotate image
-1342 Unable to determine orientation
-1343 Invalid RDF file name
-1344 PDF DLLs are not loaded
-1346 ICR Module is missing
-1347 OMR Module is missing
-1348 Languages files are missing
-1349 OCR engine initialization error
-1350 ICR Module is missing
-1351 OMR Module is missing
-1352 Languages files are missing


TWAIN
-80 TWAIN Failure due to unknown causes
-81 TWAIN Not enough memory to perform operation
-82 TWAIN No Data Source
-83 TWAIN DS is connected to max possible apps
-84 TWAIN DS or DSM reported error
-86 TWAIN Unrecognized MSG DG DAT combination
-90 TWAIN Operation was cancelled
-560 No TWAIN Library
-561 Invalid DLL
-562 TWAIN is not initialized
-564 Check status
-565 End of list
-566 Cap is not supported
-567 Source is not open
-568 Bad value
-569 Invalid state
-570 Caps neg not ended
-571 Open file
-572 Invalid handle
-573 Write to file
-574 Invalid version number
-575 Read from file
-576 File is not valid
-577 Invalid access right
-578 Custom base
-579 Denied
-580 File exists
-581 File not found
-582 Not empty
-583 Paper jam
-584 Paper double feed
-585 File write error
-586 Check device on line
-587 Stop scan


Barcode
-410 Invalid error check digit
-411 Invalid bar code type
-412 Invalid bar code text out option
-413 Invalid bar code width
-414 Invalid bar code height
-415 Bar code string is too small
-416 Invalid bar code string for a specified bar code type
-417 No bar code recognition
-418 Invalid bar code measurement unit
-419 Invalid multiple max count
-420 Invalid bar code group
-421 Invalid bar code data structure
-422 No duplicated bar code
-423 Reached the last duplicated bar code
-424 Invalid bar code data string length
-425 Invalid bar code area location
-431 Barcode PDF417 symbol is found but cannot read successfully
-1382 Bar Code Engine DLL not found
-1481 Incorrect module value it should be >= 0


Automation
-690 Invalid handle
-691 Invalid state


Container
-630 Invalid state/handle
-631 Invalid operation
-632 No resources available